- Popular wall arts
Comedy and Tragedy Theatre Masks Metal Wall Art in a raw mild steel finish
This beautiful artwork depicts the traditional theatre masks of comedy and tragedy. It would make a great gift for theatre or drama lovers and the variety of sizes mean it can fit in a number of spaces.
This is available in 5 sizes as standard. These are heights of 35cm, 50cm, 70cm, 100cm and 120cm. We can also make these in custom sizes if you would prefer please just send us a message!
It is available in 5 beautiful finishes. as detailed below. Please note that the raw mild steel version will rust if left in a damp environment.
Available finishes:
Raw mild steel.
This finish will rust over time going a deep brown that changes with the seasons. Your flower is made from 3mm thick steel so it won't rust away very fast. Mild steel in open air loses around 0.5mm per 10 years. So this should still be fine in 20-30 years time.
Please note this will arrive a dark grey steel colour that will then rust when left outside.
Black Powder coat.
This durable finish is UV Stable and will also last a long time. Finished in Matt Black.
Antique Copper or Antique Silver Powder coat.
These finishes are durable outside coatings that offer a hammered / ripple effect of Copper and Black, or Silver and Black depending on the choice you pick. UV Stable and made for use outdoors.
Gold Vein.
A beautiful Gold and black vein finish, although this is the only coat not fully UV Stable so should be used in shaded locations if you want it to last a long time without fading.
All our items are produced in Cumbria right here in the UK.
If you require a size not listed, we will be able to produce this for you, but there will be an additional time delay in receiving your item and there may be a small additional charge for the custom sizing.
We can also produce other wall art, so please get in touch if you require a bespoke item.
About Lakeland Steel
------------------------------
In 2015 we started life in a small barn in the Lake district near Hawkshead. We had a simple CNC Plasma machine, with 1 member of staff and some spray cans.
The first product we launched was a 150mm drain cover, and the first one sold just a few hours after we first listed it, which was vastly unexpected as the paint was not even dry on it by that point!
A lot has changed since then with our Factory in Millom, Cumbria and our state of the art Fiber laser machines and Powder coating setup. We have a great friendly team and we produce a variety of our own metal products.
We achieve this on our fiber laser cutters, powder coating system and of course with our own hands, finishing items and packing them.
This results in the highest possible product quality as we're using the latest cutting and finishing systems, and our hand finishing touch gives us a view on our products throughout the process for quality control.
We're so confident you'll love our product, that if you don't you can return it for up to 90 days for a full refund.
Frequently asked Questions
--------------------------------------
Q: How soon will my order arrive?
A: All orders are dispatched within 1 working day, and we ship Royal mail 1st class by default (Or a 24 hour courier if over 1Kg). While we can't guarantee the courier will deliver your item next day, this almost always is the case. If you require a guaranteed service please pick the special delivery shipping option.
Q: Can you make me a specific item?
A: We do take requests for new products. However, there may be a small delay before we launch it while it's designed and we produce stock.
Q: Do you make any other cool things?
A: We do! Have a browse of our shop for more great products. We also make other items such as wall arts, signs, monograms and other animals too.
Q: How can I contact you?
A: Click on Contact seller on Etsy.
Q: How can I hang my wall art?
A: Using a nail or a screw, between a gap in the art work, more to be used on larger art pieces. W
Our other products
---------------------------
We produce lots of other products. We make amazing wall arts, garden art, jewellery, sculptures, gun targets, and can even sell you pieces of steel cut to size or shape for your own products. It's all available here so please browse our shop.
We ship most of our free items on a 24-hour courier service but we also use 48-hour for certain product sizes and weights. Upgraded shipping and processing is available on checkout from £8.
View our full shipping policy here
Order type A: Standard products and stocked items:
(If you have any Custom orders, cut to size sheet or personalised orders as well, then your whole order will be shipped as Order type B below)
1) Standard delivery - £0.00
Your order will be dispatched within 2 working days if stocked on standard delivery, almost all stocked items will dispatch within 1 working day however. Most items will ship on a 24 hour service on standard delivery but some heavy items or large items may go on a 48 hour service.
2) Quicker delivery - £8.00
Your order will be dispatched within 1 working day (Cut off time 13:00). All orders except extremely large or heavy items will go on a 24 hour service. Some may go on a AM service on occasion. Typically items over 2000mm in length or over 60Kg will be those that do not always go on a 24 hour service.
3) Express delivery - £19.00
Your order will be dispatched within 1 working day, most orders on this option will go same working day (Cut off time 13:00). Your order will be shipped on a AM service. Some heavy or large orders may only be possible to go via a 24 hour service, and in rare cases only a 48 hour option is available.
4) Drop everything and do my order - £70.00
This option is typically for custom cut orders to jump the cutting and finishing queue, but can be used on stock items. We will drop everything and ship your order straight away on the best shipping service available to a 10:30am service and where the cost to us does not exceed £70.00 extra over standard shipping.
Order type B: Custom orders, cut to size sheet orders, personalised orders:
1) Standard delivery - £0.00
Custom orders will be cut by standard within 3 working days, our average dispatch is between 1 and 2 working days.
Your item will be shipped on a 24 hour courier where possible, but it may go on a 48 hour one for certain weights and package sizes (typically 20-30Kg upwards or very long pieces over 1400mm).
2) Quicker delivery - £8.00
Custom orders will be cut by standard in 1-2 working days.
Your item will be shipped on a 24 hour courier (there maybe a few exceptions such as very heavy items over 60Kg which will require a 48 hour pallet service).
3) Express delivery - £19.00
Custom orders will be cut within 1-2 working days but prioritised, our average on express is 1 working day.
Your item will be shipped on a 24 hour AM service (some exceptions may occur such as pallet items where next day service will be booked).
4) Drop everything and do my order - £70.00
Custom orders will be cut within 1 working day, we aim to cut and ship the same day of order if placed by 11am. Typically with finishing and packaging timescales we find 60% of orders ship same day and 40% the following day on this service.
Your item will be shipped on the best available service to 10:30am for the item size that does not exceed the £70.00 fee. This typically is a 10:30am service for items to 60Kg in weight and next day for heavier pallet items.
Sometimes a AM pallet service is available. Please contact us if you need more definite time scales.
This is a snippet of the most relevant parts of our policy for this product, there is more information on the full policy at this page View our full shipping policy here.
No reviews found
Lakeland Steel (Laser Factory Ltd) is a laser cutting company based in the Lake District, Cumbria. All our products are designed and produced here. Among the peaceful hills with the odd ball of wool trotting around, we're buzzing away creating things we feel are special. We are just as happy cutting customers parts, or producing our own products. If you need some metal and don't or can't create it yourself, then we're happy to help.
Towards the end of 2014 I spotted a stainless steel key ring someone had made on my social media and I thought it looked amazing. Almost immediately I thought, well how hard could it be to make metal items myself?
After a few evenings of slightly over ambitious hunting on the internet I decided that I could just about afford a CNC Plasma machine. This particular machine was an air plasma and it uses compressed air and electricity to make an incredibly hot plasma cutting arc that moves over the metal plate.
6 weeks later and the new machine was installed in a barn section a little bigger than a single garage and ready to run. It quickly became clear that an air plasma does not cut quite fine enough to make key rings and I should have done a few more days research! And as a result new projects were born that the machine was suitable for.
The first item I needed was a drain cover for a down pipe cover on the old house I lived in. Nothing was available in the size I needed (12.5" x 11.9") so I cut one myself. Spray painted it with Black Hammerite paint and thought I may as well list them on eBay. Within an hour we sold one, and I panicked as the paint wasn't even dry yet in the make shift spray painting "zone".
We've not looked back since and quickly ventured in to metal wall art which also started to fly off the shelves faster than expected.
It was not long before we had to move to a larger industrial premises and the closest destination available at the time was in the west Cumbrian coastal town of Millom. This is now where we produce all of our products and house our machinery. Millom has a long history of metal works and although the Iron works are now gone we feel like we've ended up in the right spot.
In a blink of an eye there were simply not enough hours in the day and we started employing some incredible staff and had to hang up the one man band hat. The team has only got stronger over the years, and everyone enjoys the process of bringing our creations to life. And I have to admit it's true that often someone else can do something better than you can yourself, even if it was a little daunting handing over control of parts of the process to someone else.
Eventually we bought with the help of a good friend and new business partner our first laser and a much chunkier HD XPR Plasma cutter. This now allowed us to cut the keyrings that started our journey as well as improving the cut quality of all our metal art work.
The next step was to escape from the mess and hassle of wet painting our products. We installed a high end powder coating booth, spray gun and oven. This gives us a better finish, and a huge variety of finishes too. But the biggest advantage, we can now paint and ship items the same day instead of waiting for a week or two for the wet paint to be dry enough.
A few years passed of non stop ideas and projects before we upgraded to a powerful 6kw laser and we were finally plasma free in 2020. All our metals up to 30mm can now be cut by laser.
Our laser cutters offer by far the best cut, and the machine we now use was an unimaginable dream back in 2014.
Finally in 2021 we expanded into Jewellery with the addition of some special polishing machines, and a ultra fine laser cutter & engraver for the jewellery. It can only cut up to 154mm x 154mm in size but offers really incredible cut quality and detail. We've started making exciting new products here and so far everything we've been offering has again caught us out by selling quicker than we thought they might. At least we're kept on our toes!
As it stands today we've learnt an awful lot and know how to extract great products, art, projects and customers parts from a sheet of metal with ease.
Our quality, tolerances and repeatability are excellent, and we're excited to work for either a one off part or a bulk order of thousands of items.
